SOFTWARE     |    INSTRUMENTS    |    SYSTEMS
About  |  Support  |  Contact
» Support » Downloads » InspectionWare Applications
AG101 Analysis
Analysis software for GE Specification P3C-AG101 Rev D.
Support

Release Notes:

Version DateNotes
IW AG101 Rev D
IW AG101 Analysis 1.0.115-R1.3231 Aug 2021Features
1) Custom file import
IW AG101 Analysis 1.0.115-R1.2111 Jul 2021Bug Fixes
1) Temporary folder access for report generation. The folders were not being auto generated for some users.
IW AG101 Analysis 1.0.115-R1.221 Apr 2021Bug Fixes
1) Indication Detail Sheet generation
2) Adding Indications Table
IW AG101 Analysis 1.0.115-R1.122 Mar 2021Major Features
1) Implemented custom reporting with consolidated Indications Table.
3) Option for including indication detailed analysis in report.
4) Added user defined Peaked Amplitude and Related Indication columns.
5) dB calc for max dim and sig dur in indications table and report.

Bug Fixes and Improvements
1) Improved gate positioning on raw waveform
2) Optimized cursor synchronization
3) Improved application response time and stability
IW AG101 Analysis 1.0.115-B512 Feb 20211) Added readout for total % Undefined
2) Improved file conversion module
IW AG101 Analysis 1.0.115-B413 Dec 20201) Exposed parameter to adjust Zone Width similar to the option available in IW AG101 Rev D ver 0.6.
2) Added file conversion module to import supported third party data files.
3) Exposed parameter for Minimum SNR threshold when clustering for Amplitude only indications. This parameter is similar to the reference Amplitude threshold used for SNR clustering.
4) Partially implemented reporting features (for installation and feature test only)
IW AG101 Analysis 1.0.115-B301 Nov 20201) Added Included/Excluded indication colors
2) Improved detection of indications connected to geometric signals.
3) Added Max Dim and Sig Duration edit boxes to the Indications Review page.
4) Implemented ROI based filtering of the consolidated indications table.
IW AG101 Analysis 1.0.115-B214 Oct 20201) Fixed ROI based indication location bug.
2) Added mouse position readout on plot displays
3) Improved mapping parameters setup. This may increase processing time but improves detectability.
IW AG101 Analysis 1.0.115-B116 Sept 20201) Improved signal duration and EBW comparison.
2) Improved cursor tracking on mapped CScans.
3) Major feature implementation is complete. AG101 Application status upgraded to Beta.
IW AG101 Analysis 1.0.115-A1201 Sept 2020EBW Comparison bugfix. Improved auto adjustment of the gate around the flaw signal.
IW AG101 Analysis 1.0.115-A1130 August 2020Implemented automatic handling of AScan time zero at probe vs AScan time zero at first interface.
IW AG101 Analysis 1.0.115-A1025 August 2020Improved detection of artificial gates
IW AG101 Analysis 1.0.115-A918 August 2020Bug fixes for WPT datafiles
IW AG101 Analysis 1.0.115-A809 July 20201) Import of WPT files
2) Import of rot_xsn.xml files
IW AG101 Analysis 1.0.115-A718 June 20201) Auto set units from datafile.
2) Speed and stability improvements
IW AG101 Analysis 1.0.115-A617 June 2020Bug fixes to run WestPenn data
IW AG101 Analysis 1.0.115-A511 June 2020ROI Editor Bug Fixes
IW AG101 Analysis 1.0.115-A426 May 2020Prototype release of IW AG101 Rev D
Legacy IW AG101 Rev C Versions
11.0.1.201 A v0.6a20 November 20191) Implemented Auto Gate Adjustment for Signal Duration and Maximum Dimension calculations
2) Implemented use of Max diameter circle around the indication for Max Dimension calculations
11.0.1.201 A v0.503 October 2019Bug Fixes and Feature Requests as per the Excel Tracker
11.0.1.201 A v0.426 August 2019Bug Fixes and Feature Requests as per the Excel Tracker
11.0.1.190v0.322 July 2019Rebuilt 11.0.1.180v02
11.0.1.180v0.218 July 2019Bug Fixes from first review, Updated Help document (Bad Build)
11.0.1.180v.105 June 2019Draft versions for feature preview

Setup Steps:

  1. Please un-install any existing version of IW AG101 with build number11.x.x.x
  2. Download and install the most recent IW AG101 Analysis 1.0.115-xx executable.
  3. On launch select Options > Advanced > Applications from the Menubar
    1. Activate using the license key for version 11p5. Please note that 11.x.x.x soft licenses are not compatible with the new application.
    2. Specify the data file units (mm or in)
    3. Specify the root folder for the scan data. The root folder must contain the part folders (forging type) and each part folder contains folders named according to the serial number of the forging. The serial numbered folders will contain the data files from all scans of the forging.
    4. Select where the Data Viewer window opens with respect to the main analysis windows. This application requires two monitors.
  4. The application is now setup for AG101 analysis.
  5. Additional details are available in the attached Help document.

Software requirements

    • OS supported: Windows 7 and up
      Note:       To enable full CPU/GPU acceleration on Windows 7, please download and install either Internet Explorer 10 or Windows 7 Platform Update. The functionality is already a part of Windows 8 and up.
    • InspectionWare requires .NET framework version 4.5 or above installed on your system. If you do not have the proper version of .NET framework, click here to download and install it. Please note that Windows 8 and up already includes .NET 4.5.
Download and Installation Instructions
    1. Right-click on the file name in the "Downloads" section below and choose "Save Target As" or "Save..." to download the file to your computer.
    2. Locate the file you have just downloaded then run it to initiate the install process.

      Note for Windows 7 users
      To run the downloaded installer, right-click on the file and from the popup menu select "Run as Administrator" option.
      Access to downloads on this page is restricted.
      Please provide the following:
      ( Required field)
      E-mail:
      Download Password:
      The following file links will become active once the required information is submitted:
      Related Files
      P3C-AG101 Rev D Analysis Flowchart v02.pdf (62.8 MB)
      GE P3C-AG101 Analysis Software User Guide ver D 0.2.pdf (2.4 MB)
      GE P3C-AG101 Rev D Analysis Quick Start v0.1.pdf (1.7 MB)
      GE P3C-AG101 Rev D Analysis Basic Principles.pdf (629.2 kB)
      InstallIWAG101Analysis 1.0.115-R1.32.exe (463.7 kB)
Document Reference
Categories
NDE Software
InspectionWare 
Document Number
MSZI-ALDNYH5243
Published
11/21/2019 Rev: 1.0
Support for InspectionWare
  Print Email page Share