UTEX does not maintain or support these drivers. If you are unsure of what driver to use, please consult the hardware manufacturer directly, or contact UTEX for further guidance.

For the simplest installation process, this driver package should be installed on the computer before installing the Acquisition Logic hardware.

Windows 7 Users may need to manually install .NET Framework. Click here to download and install version 4.0 installer from UTEX

or visit www.microsoft.com for more recent versions.

Windows 8 and later may already have .Net Framework 4.0 or later installed. Check your Windows settings before you install a different version.

1. Ensure you have the correct .NET Framework(s) and patches installed as directed in the .NET Prerequisites section.
2. Install Drivers FIRST. Then turn off the computer and install the digitizer board(s).
3. Install the digitizer board(s), and turn on the computer. When Plug and Play detects the board(s), allow the computer to automatically (choose the recommended setting) install the driver.
4. If asked to locate the driver, browse to C:\Program Files (x86)\Acquisition Logic\AL .NET4\(Driver version# )\ to find the correct *.INF file to complete the installation.
5. You are done the main installation. Restart your computer.
6. Once you have restarted the computer, you can access and control the digitizer boards via your SDK or application software.

You can find this program in C:\Program Files (x86)\Acquisition Logic\AL.NET4\4.0.4\Scope4.exe once you have installed the driver package.

The Scope program is intended for tests of functionality and demonstration of the features of the digitizers. It is not configured for data acquisition or scanning applications.

Select Acquisition Logic Digitizer from the drop-down list, then click the [Add] button.

Most versions of InspectionWare will automatically copy the required DLLs to the InspectionWare BIN folder. If you need to manually copy the DLL:

1. Browse to C:\Program Files (x86)\Acquisition Logic\AL .NET4\4.0.4\
2. COPY the file ALNET4.dll to C:\InspectionWare8\Bin\ for 32 bit versions or C:\InspectionWare8\Bin64\ for 64 bit versions