SOFTWARE     |    INSTRUMENTS    |    SYSTEMS
About  |  Support  |  Contact

» Support » Knowledge Base » Application Notes
How to run Winspect and InspectionWare on the same computer
Support
Note: Running Winspect and InspectionWare simulaneously is not supported at this time. You have to run each application separately.

To enable a workstation to run Winspect and InspectionWare...

  1. Install the Acquisition Logic .NET driver for InspectionWare as per instructions on the download page.
  2. Download the Acquisition Logic .NET driver for Winspect from the driver installation page. Do not follow the driver installation instructions but simply install the downloaded .msi file on your computer.
  3. Both InspectionWare and Winspect are now ready to run.

Note: The drivers mentioned are available for download in the "Related pages and files" section below.

Related Resources
Acquisition Logic .NET Drivers for InspectionWare
Downloadable Windows Installer package containing Acquisition Logic .NET Drivers for InspectionWare
» Support » Downloads » Drivers
Acquisition Logic .NET Drivers for Winspect
Downloadable Windows Installer package containing Acquisition Logic .NET Drivers for Winspect
» Support » Downloads » Drivers
Document Reference
Categories
Instruments
NDE Software
Acquisition Logic Devices
Winspect Data Acquisition
InspectionWare 
Document Number
MSZI-7WTPB60948
Published
10/14/2009 Rev: 1.0
  Print Email page Share