MicroPulse Utilities for MP6, MPLT and LTPA, plus older generations | Note:
The following utilities are provided as a courtesy to UTEX Scientific Instruments customers, and are therefore offered on an "as is" basis. UTEX does not maintain or support these programs. If you are unsure of whether and how to use these tools, please consult the hardware manufacturer directly, or contact UTEX for further guidance. Supported Instruments: MicroPulse MP6, LTPA, MPLT Instruments that are compatible with PeakNDT Ultilites Version MCPU V1.2.0.0 System Requirements:
Do not run the PeakFlashUpdate utility without explicit instructions form either Peak NDT or UTEX. Doing so improperly may damage your instrument, requiring it to be returned to Peak NDT for a non-warranty repair. The ZIP contains document: PNL 1190 MicroPulse Utilities User Guide.pdf. This document contains instructions for updating firmware and for assigning a new IP address to the instrument using the PeakMCPUIPAssign program. Use PeakIMCPUPAssign.exe to assign a new IP address to the latest generation of Peak NDT MicroPulse instruments, such as MP6, LTPA, and MPLT. Use PeakIPAssign to assign a new IP address to older instruments such as MP5 and LT.
Access to downloads on this page is restricted.
The following file links will become active once the required information is submitted: Related Files MICROPULSE UTILITIES LATEST VERSIONS MP6_LTPA_MPLT2.zip (3.7 MB)
|
Print Email page Share |