Utex has created close-knit relationships with system integrators around the world in order to most easily facilitate the creation and integration of our systems as quickly and capably as possible. The list of Integrators below will allow you to contact our System Integrators directly, as for most applications they will be able to help to suit your needs. For those with system requirements which no System Integrator is ideally suited to, Utex can help directly.

Each Integrator has unique capabilities, which have been briefly detailed, along with contact information, and location.

Canada

top

Eclipse Scientific Products Inc.

Waterloo. Ontario

Eclipse Scientific Products builds scanners for pipeline inspection, weld inspection and transducer characterization work. They have extensive experience in SCC sizing as well as corrosion mapping.

Contact: Robert Ginzel Phone: (519) 794-0110 ext. 21 or toll free (800) 490-1072 Email: rginzel@eclipsescientific.com Website: www.eclipsescientific.com

Best suited for: New Systems, Laboratory Scanners, Portable Scanners, Ultrasonic Systems, Winspect Training

UTEX Scientific Instruments Inc.

Mississauga. Ontario

UTEX's primary business activity is developing hardware and software for system builders. This includes all of the components needed to build inspection or material characterization systems. UTEX will occasionally build systems for end-users when no system integrator is ideally suited for the scope of the work to be done.

Contact: Walter Weber Phone: 905-828-1313 ext 223 Fax: 905-828-0360 Email: wweber@utex.com Website: www.utex.com

Best suited for: New Systems, Scanner Retrofits, General Purpose Scanners, Ultrasonic Systems, On-line Measurement Systems, Winspect Training, Imagine3D Training Laboratory Scanners, Portable Scanners

United States

top

Cobra Scientific

Santa Ana, California

Cobra Scientific manufactures and integrates automated and manual non-destructive test equipment and fixtures to assist with Ultrasonic and Eddy Current NDT (non-destructive testing) in the Aerospace, Oil & Gas, and Power Generation as well as other non-aligned industries.

Contact: Greg Smith Phone: (714)-340-7950 x101 Fax: (714)-439-2100 Email: gregs@cobrascientific.com Website: www.cobrascientific.com

Best suited for: New Systems, Robotic Automation, Robotic Tooling and Handling, Mechanical Engineering

Genesis Systems Group

Davenport, Iowa

Genesis builds robotic welding systems, assembly automation and robotic tooling and material handling. Products serve automotive, manufacturing, light and heavy industry companies. Genesis will provide high level performance and out of the box part flow.

Contact: Whitney Moon Phone: (563) 445-5685 Fax: (563) 445-5699 Email: wmoon@genesis-systems.com Website: www.genesis-systems.com

Best suited for: New Systems, Robotic Automation, Robotic Tooling and Handling, Mechanical Engineering

Hunter Controls

Chandler, Arizona

Hunter Controls provides CMM Calibration, Repairs and Upgrades, Ultrasonic scanning system support, motion control system upgrades, custom computer systems, workstations, industrial rack mount PC systems, and retrofits Gantries.

Contact: John Hunter Phone: (602) 549-9714 Email: john@huntercontrols.com Website: www.huntercontrols.com

Best suited for: New Systems, Gantry Retrofits, CMM Calibration and Upgrades, Mechanical Engineering

Laser Techniques Co.

Redmond, Washington

LTC provides both standard products and custom systems for laser-based profilometry and laser-scanned FPI for noncontact measurement and inspection applications. Their products provide high-resolution, accurate and quantitative images of features such as cracks, corrosion, dents and deformation in systems such as nuclear steam generators, piping systems and safety-critical aerospace components.

Contact: Jim Doyle Phone: (425) 885-0607 Fax: (425) 885-0802 Email: jimd@laser-ndt.com Website: www.laser-ndt.com

Best suited for: New Systems, Laser Profilometry, Laser Scanned FPI, Eddy Current Scanners, Mechanical Engineering

Marietta NDT.

Marietta, Georgia

Marietta Nondestructive Testing’s customized engineered systems offer large scale gantry scanners with multiple axes of motion. Ultrasonic testing systems are capable of inspecting complex shapes of varying sizes quickly and are exclusively designed to meet customers’ specific requests. In addition to ultrasonic testing, Marietta NDT is also expert in the design and manufacture of X-Ray systems and other specialized testing machines.

Contact: Steve Norred Phone: (770) 528-9000 Fax: (770) 426-9713 Email: s.norred@marietta-ndt.com Website: www.marietta-ndt.com

Best suited for: New Systems, General Purpose Scanners, Immersion Scanners, Gantry Scanners, Surface Following Scanners, Laboratory Scanners, Ultrasonic Systems, Eddy Current Systems, Air Scan Systems, Mechanical Engineering

QMI Inc.

Huntington Beach, California

Quality Material Inspection Inc. were the first to introduce Air Scan technology to the world. QMI can build just about any size or type of custom scanner using Winspect. They predominantly produce squirter and Air Scan systems for the aerospace industry although they occasionally service other industries as well.

Contact: Peter Grandia Phone: (714) 903-4500 ext. 114 Fax: (714) 903-4550 Email: pete@qmi-inc.com Website: www.qmi-inc.com

Best suited for: New Systems, Gantry Scanners, Ultrasonic Systems, Air Scan Systems, Mechanical Engineering

Reliant Technologies Inc.

Linden, Texas

Reliant builds very large immersion scanners and other specialized machines that run using Winspect. Their experience includes aerospace, pipe and in-plant inspection systems. Reliant can also develop novel inspection heads that provide 100% coverage in a single pass to increase production throughput.

Contact: Larry Wells Phone: 903-756-5656 Fax: 903-756-5283 Email: lwells@reliantndt.com Website: www.reliantndt.com

Best suited for: New Systems, Immersion Scanners, Ultrasonic Systems, On-line Measurement Systems, Mechanical Engineering

Resource Engineering

Phoenix, Arizona

Resource Engineering without question build the highest quality scanners available. Their machines typically run on air bearings and ceramic or composite guideways. The repeatability and accuracy of their scanners are similar to those of a CMM. All of their scanners are capable of complex contour following using their own machine control software that interfaces seamlessly with InspectionWare and Winspect.

Contact: Tim Swift Phone: (480) 507-0082 Fax: (480) 545-1314 Email: tswift@res-eng.com Website: www.res-eng.com

Best suited for: New Systems, Immersion Scanners, Software Sales, Systems Design and Implementation

United Kingdom

top

Indata Products

Bristol

Indata Products are active in designing and building titanium billet inspection systems. They also build immersion systems for large forgings and small immersion systems for laboratory use.

Contact: Ian Glover Phone: 011 44 1454 778429 Fax: 011 44 1454 776402 Email: ian.indata@fsmail.net

Best suited for: New Systems, Immersion Scanners, Gantry Scanners, Ultrasonic Systems, Mechanical Engineering

Peak NDT Ltd.

Derby

Peak NDT are experts in developing new inspection machines for specialized applications in the power, aerospace and petrochemical industries. They have a rare depth of understanding of ultrasonics and are experts in using our simulation and data acquisition products to solve just about any inspection problem.

Contact: Andrew Whittle Phone: 44-133-273-8752 Fax: 44-133-273-8878 Email: andy.whittle@peakndt.com Website: www.peakndt.com

Best suited for: New Systems, Ultrasonic Systems, Mechanical Engineering, Winspect Training, Imagine3D Training

The Netherlands

top

Inspection Technology Europe BV

Vogelenzang

We supply a wide range of standard NDT products for competitive prices as well as for high quality products. Secondly we design and build tailor made NDT systems for production and lab in a team of Allied Engineers each with their specialism in Mechanics, Electronics and Software.

Contact: Ing. Frans M.Tollenaar Phone: 31 (0)23 5267975 Fax: 31 (0)23 5267977 Email: f.tollenaar@inspection-technology.com Website: www.inspection-technology.com

Best suited for: New Systems, Immersion Scanners, Laboratory Scanners, Ultrasonic Systems, On-line Measurement Systems

Russia

top

Panatest

Moscow

If your company operates in Russia or any of the old Soviet block countries, you may wish to contact Panatest. As representatives, Panatest are able to offer local sales and support for our products.

Contact: Oleg Portnov Phone:7 495 789 3748 Fax: 7 495 362 8633 Email: mail@panatest.ru Website: www.panatest.ru

Best suited for: New Systems, General Purpose Scanners, Ultrasonic Systems, Imagine3D Training

Korea

top

Acoulab Co. Ltd.

Seoul

Acoulab make scanning acoustic microsopes using our high-frequency UT340 pulser receivers. They have their own C-scan software.

Contact: Weon Heum Lee Phone: 82 32 676 8077 Fax: 82 32 676 8079 Email: whlee@acoulab.com Website: www.acoulab.com

Best suited for: New Systems, Laboratory Scanners, Ultrasonic Systems

China

top

LeePipe Tube Inspection Technologies.

Beijing

Lee Pipe design and build pipe and aerospace inspection systems.

Contact: Tom Lee Phone: 86 10 643 92 069 Fax: 86 10 643 92 070 Email: tomlee@leepipe.com Website: www.leepipe.com

Best suited for: New Systems, General Purpose Scanners, Ultrasonic Systems